Cellular Devices
G60
COMPACT IP67 WATER-PROOF AND RUGGED GPS TRACKER
The G60 is a compact 2G / 3G GPS tracking device with a variety of inputs and outputs to cater for the most demanding applications. Its rugged housing is IP67 rated to withstand the harshest environments, without sacrificing tracking and communications performance. With the internal GPS and cellular antennas installation is a breeze. The internal backup battery provides alerts and tracking operations even when external power is removed.
Available in two harness types:
– 12-wire harness, which exposes the 3 x Digital Inputs, 3 x Switched Ground Outputs and RS232 interface.
– 3-wire harness, Power, Ground, and Ignition wires for super-simple, foolproof installation.
- Rugged weatherproof housing IP67
- Easy install & easy to conceal
- Superior design and performance
- Compact 2G / 3G GPS Tracker (4G coming)
- Variety of inputs and outputs
- Great for equipment location and run hours
Compact rugged IP67 rated housing Made of sturdy Nylon/Glass composite plastic the housing is extremely tough and UV resistant, is resistant to oils and can easily handle high temperatures. Dimensions: 125mm x 80mm x 25mm |
Harness Options The G60 is manufactured with various harness options. Because of the nature of the housing the wire harness is soldered to the PCB at production. |
Automotive Power Voltage Operating Current Sleep Current The G60 passes stringent automotive power “load dump” tests to ensure that it will continue to operate in the harshest electrical systems. A built-in self-resetting fuse makes installation easy and safe. |
Operating Temperature On external power. Below 0°C the standard internal backup battery’s ability to deliver sufficient power to operate the cellular modem is reduced. Below 0°C and above +45°C the internal backup battery will not be charged as a safety precaution due to dangers associated with charging batteries at extreme temperatures. For battery powered tracking in extreme temperatures enquire about our Remora tracker with extended temperature range battery options. |
High sensitivity GPS
|
Low noise GPS amplifier GPS signals are boosted by a special low-noise amplifier (LNA). This allows the G60 to operate where other units will fail to receive GPS signal. |
2G or 3G (NextG) The G60 can be manufactured for specific markets around the world with cellular modem modules approved by all the major networks. 2G Modem: 3G Modem – EU: 3G Modem – NA: 3G Modem (Global Option:) *enquire for other bands and LTE / 4G options |
Certifications CE, C-TICK, ICASA, ACMA, ISO 7637-2 |
Internal Antennae Internal GPS and cellular antennas. |
Backup Battery The standard 850mAh LiPo backup battery allows the G60 to operate when external power is removed for up to 7 days, depending on the amount of movement. |
4 x Digital Inputs
|
3 x Digital Outputs 3 x switched ground digital outputs, easily wired up to switch external lights, relays, buzzers, sirens, motors and other devices. Outputs can be used to immobilise a vehicle. |
3 Axis Accelerometer The 3 axis accelerometer allows the G60 to detect harsh driving events (harsh acceleration, braking and cornering) and this information can be used to monitor driver behaviour and unsafe driving. It also allows the G60 to go to ‘sleep’ when not moving, resulting in extremely low standby current. |
iButton Communicate with common one-wire iButton devices. |
RS232 RS232 receive and transmit allow the G60 to communicate with external RS232 devices. These can include fuel monitoring, Garmin FMI, tyre pressure monitoring. The RS232 interface can also be used to configure the device and to test and debug. |
Switched 3.3V Out The G60 can provide power to external sensors via this 3.3V power line, allowing for easy installation and doing away with the need for additional external power supplies. Maximum current: 200mA |
Switched 5V Out The G60 can provide power to external peripherals via this 5V power line, allowing for easy installation and doing away with the need for additional external power supplies. Maximum current: 300mA |
DMCAN Peripheral Port Digital Matter has a range of peripherals that connect to the G60 via the DMCAN peripheral port. Peripherals such as the RFID Driver ID reader, 5 digit keypad, data console and RF gateway use the DMCAN port. |
Flash Memory The G60 has sufficient memory to store over 50,000 records in its flash memory. Normally the data will be sent to the server immediately but if the device is out of range then there is sufficient space to ensure that no data is lost – for many weeks of driving! The flash memory is also used to store parameters, GPS aiding data, accident data, driver lists and other important information that needs to be securely stored. |
Garmin FMI The G60 firmware can communicate with Garmin FMI devices. |
Warranty One year manufacturer’s warranty. |