IOT Devices

G62 – CATM1 & NB-IOT

COMPACT IP67 WATER-PROOF AND RUGGED 4G GPS TRACKER

The G62 is a compact 4G GPS tracking device with a variety of inputs and outputs to cater for the most demanding applications. The 4G modem allows for operation on both Cat-M1 and NB-IoT networks. Its rugged housing is IP67 rated to withstand the harshest environments, without sacrificing tracking and communications performance. With the internal GPS and cellular antennas installation is a breeze. The internal backup battery provides alerts and tracking operations even when external power is removed.

  • Rugged weather proof housing IP67
  • Easy install & easy to conceal
  • Superior design and performance
  • 4G Cat-M1/NB-IoT modem
  • Variety of inputs and outputs
  • Great for equipment location and run hours

 
Rugged & Weatherproof
Advanced tracking device
Compact design
Multiple inputs and outputs

Compact rugged IP67 rated housing

Made of sturdy Nylon/Glass composite plastic the housing is extremely tough and UV resistant, is resistant to oils and can easily handle high temperatures.
The housing is sealed using 4 screws and has 2 convenient mounting tabs.

Dimensions: 125mm x 80mm x 25mm
Weight: 250 grams

Automotive Power

Voltage 
8V to 45V DC (max)

The G62 passes stringent automotive power “load dump” tests to ensure that it will continue to operate in the harshest electrical systems. A built-in self-resetting fuse makes installation easy and safe.

Operating Temperature

On external power.
-20°C to +60°C

Below 0°C the standard internal backup battery’s ability to deliver sufficient power to operate the cellular modem is reduced. Below 0°C and above +45°C the internal backup battery will not be charged as a safety precaution due to dangers associated with charging batteries at extreme temperatures.

For battery powered tracking in extreme temperatures enquire about our Remora tracker with extended temperature range battery options.

High sensitivity GPS

    • UBLOX EVA-M8 GPS module
    • Supports GLONASS and other GNSS systems
    • 72 channel high sensitivity receiver
    • -167dBm industry leading tracking performance
    • Battery back up for optimal hot-start performance
    • AssistNow Offline aiding data for extremely fast time-to-first-fix and performance in urban canyon environments

Low noise GPS amplifier

GPS signals are boosted by a special low-noise amplifier (LNA). This allows the G62 to operate where other units will fail to receive GPS signal.

2G or 4G Cat-M1 / NB-IoT

The 4G modem allows for communication on either Cat-M1 and NB-IoT networks, both specifically developed for the demands and constraints of IoT applications. These networks offer extended range, improved building penetration and low power usage.

The G62 can also be manufactured with a 2G modem for specific markets around the world.

Internal Antennae

Internal GPS and cellular antennas.
Having the antennas inside the housing makes for very simple and quick installation. The G62 has had its antennas tuned by the top laboratories to ensure optimal performance.

Backup Battery

The standard 850mAh LiPo backup battery allows the G62 to operate when external power is removed for up to 7 days, depending on the amount of movement.

3 x Digital Inputs

    • 1 x Ignition line
    • 2 x digital inputs with configurable pull-up / pull-down
    • Numerous configuration options including switches and duress/panic alerts

1 x Analog Input

0 – 30V analog input

*Shared with digital output, meaning only 1 can be used at a time

1 x Digital Output

1 x switched ground digital output, easily wired up to switch external lights, relays, buzzers, sirens, motors and other devices. Outputs can be used to immobilise a vehicle.

*Shared with analog input, meaning only 1 can be used at a time

3 Axis Accelerometer

The 3 axis accelerometer allows the G62 to detect harsh driving events (harsh acceleration, braking and cornering) and this information can be used to monitor driver behaviour and unsafe driving. It also allows the G62 to go to ‘sleep’ when not moving, resulting in extremely low standby current.

iButton

Communicate with common one-wire iButton devices (for Driver ID)

Flash Memory

The G62 has sufficient memory to store over 50,000 records in its flash memory. Normally the data will be sent to the server immediately but if the device is out of range then there is sufficient space to ensure that no data is lost – for many weeks of driving!

The flash memory is also used to store parameters, GPS aiding data, accident data, driver lists and other important information that needs to be securely stored.

Warranty

One year manufacturer’s warranty.